git.8kb.co.uk Git - slony-i/slony_failover/blob - README.md

   1 #Slony-I Failover / Switchover
   2
   3 Perl script to assist with performing switchover and failover of replication sets
   4 in PostgreSQL databases replicated using Slony-I.
   5
   6 The script can be run in interactive mode to suggest switchover or failover and
   7 will create a slonik script to perform the suggested action.
   8
   9 It's hard to put together a script for all situations as different Slony
  10 configurations can have different complexities (hence the existance of slonik),
  11 but this script is intended to be used for building and running slonik scripts
  12 to move all sets from one node to another.
  13
  14 There is also an autofailover mode which will sit and poll each node and perform
  15 a failover of failed nodes.  This mode should be assumed as experimental, as
  16 there can be guite a few decisions to be made when failing over different setups.
  17
  18 ##Example usage
  19
  20 Launch interactive mode with command line parameters:
  21
  22 ```bash
  23 $ ./slony_failover.pl -h localhost -db TEST -cl test_replication
  24 ```
  25
  26 Launch with configuration file, a minimal configuration file would be:
  27
  28     slony_database_host = localhost
  29     slony_database_name = TEST
  30     slony_cluster_name = test_replication
  31
  32 ```bash
  33 $ ./slony_failover.pl -f slony_failover.conf
  34 ```
  35 Run as a daemon in debian:
  36
  37 ```bash
  38 $ sudo cp init.debian /etc/init.d/slony_failover
  39 $ cp slony_failover.conf /var/slony/failover/slony_failover.conf
  40 $ sudo chmod +x /etc/init.d/slony_failover
  41 $ sudo update-rc.d slony_failover start 99 2 3 4 5 . stop 24 0 1 6
  42 $ sudo invoke-rc.d slony_failover start
  43 ```
  44
  45 ##Command line parameters
  46
  47 ```bash
  48 $ ./failover.pl [options]
  49 ```
  50
  51 |Switch    |
  52 |----------|------------------------------------------
  53 |-f        |Read all configuration from config file
  54 |-h        |Host running PostgreSQL instance to read state of Slony-I cluster from
  55 |-p        |Port of above PostgreSQL database instance
  56 |-db       |Name of above PostgreSQL database instance
  57 |-cl       |Name of Slony-I cluster
  58 |-u        |User to connect to above PostgreSQL database instance
  59 |-P        |Password for above user (Use .pgpass instead where possible)
  60 |-i        |Print information about slony cluster and exit
  61
  62 ##Configuration file parameters
  63
  64 | Section     | Parameter                                    | Type                          | Default                         | Comment
  65 |:------------|:-------------------------------------------- |:------------------------------|:--------------------------------|:-----------------------------------
  66 | General     |**lang**                                      | en/fr                         | *'en'*                          | The language to print messages in, currently only english and french
  67 | General     |**prefix_directory**                          | /full/path/to/directory       | *'/tmp/slony_failovers'*        | Working directory for script to generate slonik scripts and log files
  68 | General     |**separate_working_directory**                | boolean                       | *'true'*                        | Append a separate working directory to the prefix_directory for each run
  69 | General     |**slonik_path**                               | /full/path/to/bin/directory   | *<null>*                        | Slonik binary if not in current path
  70 | General     |**pid_filename**                              | /path/to/pidfile              | *'/var/run/slony_failover.pid'* | Pid file to use when running in autofailover mode
  71 | General     |**enable_try_blocks**                         | boolean                       | *false*                         |    Write slonik script with try blocks where possible to aid error handling
  72 | General     |**lockset_method**                            | single/multiple               | *'multiple'*                    | Write slonik script that locks all sets
  73 | General     |**pull_aliases_from_comments**                | boolean                       | *false*                         | If true, script will pull text from between parentheses in comments fields
  74 |             |                                              |                               |                                     | and use to generate (possibly) meaningful aliases for nodes and sets.
  75 | General     |**log_line_prefix**                           | text                          | *<null>*                        | Prefix to add to log lines, special values:
  76 |             |                                              |                               |                                 |     %p = process ID
  77 |             |                                              |                               |                                 |     %t = timestamp without milliseconds
  78 |             |                                              |                               |                                 |     %m = timestamp with milliseconds
  79 | General     |**failover_offline_subscriber_only**          | boolean                       | *false*                         | If set to true any subscriber only nodes that are unavailable at the time
  80 |             |                                              |                               |                                 | of failover will also be failed over.  If false any such nodes will be
  81 |             |                                              |                               |                                 | excluded from the preamble and not failed over, however this may be problematic
  82 |             |                                              |                               |                                 | especially in the case where the most up to date node is the unavailable one.
  83 | General     |**drop_failed_nodes**                         | boolean                       | *false*                         | After failover automatically drop the failed nodes.
  84 | Slon Config |**slony_database_host**                       | IP Address/Hostname           | *<null>*                        | PostgreSQL Hostname of database to read Slony configuration from
  85 | Slon Config |**slony_database_port**                       | integer                       | *5432*                          | PostgreSQL Port of database to read Slony configuration from
  86 | Slon Config |**slony_database_name**                       | name                          | *<null>*                        | PostgreSQL database name to read Slony configuration from
  87 | Slon Config |**slony_database_user**                       | username                      | *'slony'*                       | Username to use to connect when reading Slony configuration
  88 | Slon Config |**slony_database_password**                   | password                      | *''*                            | Recommended to leave blank and use .pgpass file
  89 | Slon Config |**slony_cluster_name**                        | name                          | *<null>*                        | Name of Slony-I cluster to read configuration for
  90 | Logging     |**enable_debugging**                          | boolean                       | *false*                         | Enable printing of debug messages to stdout
  91 | Logging     |**log_filename**                              | base file name                | *'failover.log'*                | File name to use for script process logging, special values as per strftime spec
  92 | Logging     |**log_to_postgresql**                         | boolean                       | *false*                         | Store details of failover script runs in a postgresql database
  93 | Logging     |**log_database_host**                         | IP Address/Hostname           | *<null>*                        | PostgreSQL Hostname of logging database
  94 | Logging     |**log_database_port**                         | integer                       | *<null>*                        | PostgreSQL Port of logging database
  95 | Logging     |**log_database_name**                         | name                          | *<null>*                        | PostgreSQL database name of logging database
  96 | Logging     |**log_database_user**                         | username                      | *<null>*                        | Username to use to connect when logging to database
  97 | Logging     |**log_database_password**                     | password                      | *''*                            | Recommended to leave blank and use .pgpass file
  98 | Autofailover|**enable_autofailover**                       | boolean                       | *'false'*                       | Rather than interactive mode sit and watch the cluster state for failed
  99 |             |                                              |                               |                                 | origin/forwarding nodes; upon detection trigger automated failover.
 100 |             |                                              |                               |                                 |
 101 | Autofailover|**autofailover_forwarding_providers**         | boolean                       | *'false'*                       | If true a failure of a pure forwarding provider will also trigger failover
 102 | Autofailover|**autofailover_config_any_node**              | boolean                       | *'true'*                        | After reading the initial cluster configuration, subsequent reads of the configuration
 103 |             |                                              |                               |                                 | will use conninfo read from sl_subscribe to read from any node.
 104 | Autofailover|**autofailover_poll_interval**                | integer                       | 500                             | How often to check for failure of nodes (milliseconds)
 105 | Autofailover|**autofailover_node_retry**                   | integer                       | 2                               | When failure is detected, retry this many times before initiating failover
 106 | Autofailover|**autofailover_sleep_time*                    | integer                       | 1000                            | Interval between retries (milliseconds)
 107
 108 Changes
 109 -------
 110
 111 * 08/04/2012 - Hash together some ideas for interactive failover perl script
 112 * 04/11/2012 - Experiment with different use of try blocks (currently can't use multiple lock sets indide try)
 113 * 13/04/2014 - Update to work differently for Slony 2.2+
 114 * 05/05/2014 - Experiment with autofailover ideas
 115
 116 Licence
 117 -------
 118 See the LICENCE file.