From: glyn Date: Wed, 27 Apr 2016 16:09:26 +0000 (+0100) Subject: Add some basic support for binary/WAL replicas. X-Git-Url: https://git.8kb.co.uk/?a=commitdiff_plain;h=399f595661a3c583cdd16d18e4da7ad6ea089393;p=slony-i%2Fpgbouncer_follower Add some basic support for binary/WAL replicas. Would be nice to also alter this to support replication slots. --- diff --git a/README.md b/README.md index 142e864..0944631 100644 --- a/README.md +++ b/README.md @@ -1,15 +1,30 @@ -#PgBouncer Slony-I replication set follower +#PgBouncer Slony-I replication set & WAL replication follower This script is a command-line utility to monitor the nodes in a Slony-I cluster and reconfigure pgbouncer to follow an origin or subscriber of replication sets. +Additionally the script can be used to follow WAL streaming primary/secondary +databases. The idea is pretty simple; periodically poll the slony schema to identify origin and subscriber nodes and repoint an existing pgbouncer instance to follow either -the origin for read-write or a subscriber for read-only operation. The script -takes a template pgbouncer.ini file containing all the desired settings except +the origin for read-write or a subscriber for read-only operation. For binary WAL +replication we instead periodically poll pg_*() functions on all servers to get a +picture of replication status (pg_is_in_recovery(),pg_last_xlog_receive_location(), +pg_current_xlog_location() and pg_last_xact_replay_timestamp()). + +Side note: +>Support for binary/WAL replication is an afterthought, so binary replicas are +>considered followers of the primary if they're on the same timeline. In future +>it should be possible to improve this for replicas using replication slots +>and pull all information required from the primary by looking at pg_replication_slots/ +>pg_stat_replication. It would also hopefully be possible to support following +>logical replication origins similar to how we follow slony origins. + +The script takes a template pgbouncer.ini file containing all the desired settings except for the target database and will write a copy with the target database and reload -pgbouncer. In 'ro' mode the script will try and choose a subscriber node closest -to pgbouncer host if IPv4 addressing has been used for the slony conninfos. +pgbouncer. In 'ro' mode for slony replicas (not WAL replicas currently) the script +will try and choose a subscriber node closest to pgbouncer host if IPv4 addressing +has been used for the slony conninfos. ##Example usage @@ -32,26 +47,27 @@ $ sudo invoke-rc.d pgbouncer_follower_rw start ##Configuration options -| Section | Parameter | Type | Default | Comment -|:----------|:-----------------------|:--------|:--------------------------------------------|:----------------------------------- -| Slony | slony_user | text | *'slony'* | Username used to connect to PostgreSQL and select from slony schema tables -| Slony | slony_pass | text | *''* | Recommended to leave blank and use .pgpass file -| Slony | slony_cluster_name | text | *'replication'* | Name of slony cluster (without leading underscore of schema name) -| Slony | server_conninfo | text | *null* | Conninfo string for slony a node, can be specified multiple times -| pgBouncer | debug | boolean | *false* | Churn out debugging info to log file / stdout -| pgBouncer | follower_poll_interval | integer | *1000* | Interval to poll slony cluster state when in daemon mode -| pgBouncer | sets_to_follow | text | *1* | Comma separated list of sets to follow or 'all' to follow all sets -| pgBouncer | pool_mode | 'ro/rw' | *'rw'* | Select a read-only subscriber or the origin for read-write -| pgBouncer | pool_all_databases | boolean | *'false'* | If true uses wildcard for database name in pgbouncer.ini, false uses slony database -| pgBouncer | auth_user | text | *''* | If set auth_user will be appended to conninfo written in [databases] section -| pgBouncer | only_follow_origins | boolean | *'false'* | If true pgbouncer will only be reconfigured and reloaded when sets move origin -| pgBouncer | status_file | text | *'/tmp/pgbouncer_follower_%mode.status'* | File used to store a hash depicting the state of the cluster -| pgBouncer | log_file | text | *'/tmp/pgbouncer_follower_%mode.log'* | Log file for the script -| pgBouncer | pid_file | text | *'/tmp/pgbouncer_follower_%mode.log'* | PID file for the script when run as a daemon -| pgBouncer | pool_conf_template | text | *'/etc/pgbouncer/pgbouncer_%mode.template'* | Template pgbouncer.ini file with your settings and a blank [databases] section -| pgBouncer | pool_conf_target | text | *'/etc/pgbouncer/pgbouncer_%mode.ini'* | Target pgbouncer.ini file to write a copy of pool_conf_template with a [databases] section to -| pgBouncer | pool_reload_command | text | *'/etc/init.d/pgbouncer_%mode reload"'* | System command to execute to reload pgbouncer instance -| pgBouncer | max_ro_lag | integer | *0* | Maximum lag in seconds allowed for subscriber nodes when running in ro mode. 0 = don't monitor lag. +| Section | Parameter | Type | Default | Comment +|:------------|:-----------------------|:--------|:--------------------------------------------|:----------------------------------- +| Replication | replication_user | text | *'slony'* | Username used to connect to PostgreSQL and select from slony schema tables +| Replication | replication_pass | text | *''* | Recommended to leave blank and use .pgpass file +| Replication | replication_method | text | *'slony'* | Specifies replication method in use, possible values 'slony' or 'wal' +| Slony | slony_cluster_name | text | *'replication'* | Name of slony cluster (without leading underscore of schema name) +| Server | server_conninfo | text | *null* | Conninfo string for server, can be specified multiple times. For slony only one conninfo is required (but all nodes recommended), for WAL replication all servers required +| pgBouncer | debug | boolean | *false* | Churn out debugging info to log file / stdout +| pgBouncer | follower_poll_interval | integer | *1000* | Interval to poll slony cluster state when in daemon mode +| pgBouncer | sets_to_follow | text | *1* | Comma separated list of sets to follow or 'all' to follow all sets +| pgBouncer | pool_mode | 'ro/rw' | *'rw'* | Select a read-only subscriber or the origin for read-write +| pgBouncer | pool_all_databases | boolean | *'false'* | If true uses wildcard for database name in pgbouncer.ini, false uses slony database +| pgBouncer | auth_user | text | *''* | If set auth_user will be appended to conninfo written in [databases] section +| pgBouncer | only_follow_origins | boolean | *'false'* | If true pgbouncer will only be reconfigured and reloaded when sets move origin +| pgBouncer | status_file | text | *'/tmp/pgbouncer_follower_%mode.status'* | File used to store a hash depicting the state of the cluster +| pgBouncer | log_file | text | *'/tmp/pgbouncer_follower_%mode.log'* | Log file for the script +| pgBouncer | pid_file | text | *'/tmp/pgbouncer_follower_%mode.log'* | PID file for the script when run as a daemon +| pgBouncer | pool_conf_template | text | *'/etc/pgbouncer/pgbouncer_%mode.template'* | Template pgbouncer.ini file with your settings and a blank [databases] section +| pgBouncer | pool_conf_target | text | *'/etc/pgbouncer/pgbouncer_%mode.ini'* | Target pgbouncer.ini file to write a copy of pool_conf_template with a [databases] section to +| pgBouncer | pool_reload_command | text | *'/etc/init.d/pgbouncer_%mode reload"'* | System command to execute to reload pgbouncer instance +| pgBouncer | max_ro_lag | integer | *0* | Maximum lag in seconds allowed for subscriber nodes when running in ro mode. 0 = don't monitor lag. The status_file, log_file, pid_file, pool_conf_template, pool_conf_target and pool_reload_command parameters can contain the following special values: diff --git a/pgbouncer_follower.pl b/pgbouncer_follower.pl index e2c2561..23eabcd 100755 --- a/pgbouncer_follower.pl +++ b/pgbouncer_follower.pl @@ -2,7 +2,7 @@ # Script: pgbouncer_follower.pl # Copyright: 22/04/2012: v1.0.1 Glyn Astill -# Requires: Perl 5.10.1+, PostgreSQL 9.0+ Slony-I 2.0+ +# Requires: Perl 5.10.1+, PostgreSQL 9.0+ Slony-I 2.0+ OR Streaming Replication # # This script is a command-line utility to monitor Slony-I clusters # and reconfigure pgbouncer to follow replication sets. @@ -39,6 +39,7 @@ use constant false => 0; use constant true => 1; my $g_usage = 'Pass configuration file: pool_follower.pl -f [-D] '; +my $g_method = "slony"; my $g_debug = false; my $g_pidfile = "/tmp/pgbouncer_follower_%mode.pid"; my $g_logfile = "/tmp/pgbouncer_follower_%mode.log"; @@ -72,8 +73,17 @@ unless (getConfig($opt{config_file})){ if ($g_debug) { printLogLn($g_logfile, "DEBUG: Logging to my '$g_logfile'"); - printLogLn($g_logfile, "\t Watching sets $g_clsets in Slony-I cluster '$g_clname' polling every ${g_poll_interval}ms"); - printLogLn($g_logfile, "\t Following " . ($g_all_databases ? "all databases" : "replicated database only") . " on an '$g_mode' node for the above replicated sets"); + if ($g_method eq 'slony') { + printLogLn($g_logfile, "\t Watching sets $g_clsets in Slony-I cluster '$g_clname' polling every ${g_poll_interval}ms"); + printLogLn($g_logfile, "\t Following " . ($g_all_databases ? "all databases" : "replicated database only") . " on an '$g_mode' node for the above replicated sets"); + } + elsif ($g_method eq 'wal') { + printLogLn($g_logfile, "\t Watching streaming replication lag polling every ${g_poll_interval}ms"); + } + else { + printLogLn($g_logfile, "\t ERROR: Unknown replication method: '$g_method'"); + exit(1); + } printLogLn($g_logfile, "\t Template config '$g_conf_template' Target config '$g_conf_target'"); printLogLn($g_logfile, "\t Reload command is '$g_reload_command'"); printLogLn($g_logfile, "\t Status stored in '$g_status_file'"); @@ -117,9 +127,14 @@ sub doAll { foreach my $conninfo (@g_conninfos) { $conninfo_read++; eval { - @g_cluster = loadCluster($g_clname, $conninfo, $g_user, $g_pass, $g_addr, $g_clsets); + if ($g_method eq 'slony') { + @g_cluster = loadCluster($g_clname, $conninfo, $g_user, $g_pass, $g_addr, $g_clsets); + } + elsif ($g_method eq 'wal') { + @g_cluster = loadBinCluster($g_user, $g_pass); + } if ($g_debug) { - printLogLn($g_logfile, "DEBUG: ($conninfo_read) Cluster with " . scalar(@g_cluster) . " nodes read from conninfo: $conninfo"); + printLogLn($g_logfile, "DEBUG: ($conninfo_read) " . (($g_method eq 'slony')?'Slony':'Streaming replication') . " cluster with " . scalar(@g_cluster) . " nodes " . (($g_method eq 'slony')?"read from conninfo: $conninfo":"provided via config conninfos")); foreach (@g_cluster) { printLogLn($g_logfile, "DEBUG: Node #" . @$_[0] . " DETAIL: " . @$_[1] . " " . @$_[2] . " " . (@$_[3] // "") . " " . @$_[4] . " " . (@$_[5] // "") . " " . @$_[6] . " " . @$_[7] . " " . @$_[8] . " " . @$_[9] . " " . @$_[10] . " " . @$_[11]); } @@ -190,7 +205,7 @@ sub generateConfig { my $target_auth = ""; if ($g_debug) { - printLogLn($g_logfile, "DEBUG: All databases = " . ($g_all_databases ? 'true' : 'false')); + printLogLn($g_logfile, "DEBUG: All databases = " . ($all_databases ? 'true' : 'false')); } if ($g_auth_user ne "") { @@ -264,7 +279,7 @@ sub generateConfig { if ($g_debug) { printLogLn ($g_logfile, "DEBUG: Configuration for " . ($target_is_origin ? "origin" : "subscriber") . " of sets $target_sets node #$target_node_id $target_host:$target_port"); } - if ($all_databases) { + if ($all_databases || $target_db eq '*') { $_ =~ s/(\[databases\])/$1\n\* = host=$target_host port=$target_port$target_auth/; } else { @@ -441,6 +456,106 @@ sub loadCluster { return @cluster; } +sub loadBinCluster { + my $dbuser = shift; + my $dbpass = shift; + + my $dsn; + my $dbh; + my $sth; + my $query; + my $recovery; + my $xlog_location; + my $apply_lag; + my $primaries = 0; + + my @parts; + my $timeline; + my $location; + my $primary_location; + + my $hostname; + my $port; + my $database; + my @tmp_cluster; + my @cluster; + my $node_id = 1; + $g_best_config = true; + + foreach my $conninfo (@g_conninfos) { + $dsn = "DBI:Pg:$conninfo};"; + + eval { + $dbh = DBI->connect($dsn, $dbuser, $dbpass, {RaiseError => 1}); + # Check to see if the server is a secondary, and also pull the current xlog + # location and the apply lag using pg_last_xact_replay_timestamp to get the + # last commit timestamp from the primary applied on the secondary. + # We will need to compare the current receive location to the primary xlog + # location, if they differ we can then use the apply_lag value; we'll have + # to post-process this. + # In 9.6+ we might want to pull the system identifier from pg_controldata view too + $query = "SELECT pg_is_in_recovery(), + CASE + WHEN pg_is_in_recovery() THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() + END, + COALESCE(extract(epoch from current_timestamp-pg_last_xact_replay_timestamp()),0)"; + $sth = $dbh->prepare($query); + $sth->execute(); + ($recovery, $xlog_location, $apply_lag) = $sth->fetchrow; + $sth->finish; + + ($port) = $conninfo =~ m/port=(.+?)(\s|$)/g; + ($hostname) = $conninfo =~ m/host=(.+?)(\s|$)/g; + ($database) = $conninfo =~ m/dbname=(.+?)(\s|$)/g; + @parts = split('/', $xlog_location, 2); + $timeline = qtrim(trim($parts[0])); + $location = hex(qtrim(trim($parts[1]))); + + if ($g_debug) { + printLogLn($g_logfile, "DEBUG: Server: $hostname:$port " . ($recovery ? 'secondary' : 'primary') . " at $xlog_location ($timeline/$location)"); + } + + # For WAL replication we assume if we can contact a server then it is active, + # which isn't strictly true, but nodes that have fallen behind can be excluded + # via the max_ro_lag setting. We also substitute timeline+1 for the slony + # replication set. + if (!$recovery) { + $primaries++; + $primary_location = $xlog_location; + my @node=(1,'Primary',0,$timeline,"ACTIVE",($timeline+1),$conninfo,$database,$hostname,$port,1,$xlog_location,$apply_lag); + push(@tmp_cluster, \@node); + } + else { + $node_id++; + my @node=($node_id,"Secondary".($node_id-1),1,undef,"ACTIVE",($timeline+1),$conninfo,$database,$hostname,$port,$node_id,$xlog_location,$apply_lag); + push(@tmp_cluster, \@node); + } + }; + if ($@) { + printLogLn($g_logfile, "ERROR: Could not connect to server with conninfo: $conninfo DETAIL: $@"); + } + } + + # Error if more than one primary discovered. + if ($primaries != 1) { + printLogLn($g_logfile, "ERROR: Invalid quantity of primaries: $primaries"); + die "no primaries found"; + } + # Do the post processing we mentioned above, once we know xlog locations differ + # then we can say the apply lag is correct, else it's just there has been no + # activity on the master. + else { + foreach (@tmp_cluster) { + $apply_lag = ((@$_[12] > 0 && @$_[11] != $primary_location) ? @$_[12] : 0); + my @node=(@$_[0],@$_[1],@$_[2],@$_[3],@$_[4],@$_[5],@$_[6],@$_[7],@$_[8],@$_[9],@$_[10],$apply_lag); + push(@cluster, \@node); + } + } + + return @cluster; +} + sub getConfig { my @fields; my $success = false; @@ -459,6 +574,9 @@ sub getConfig { @fields = split('=', $_, 2); $value = qtrim(trim($fields[1])); given(lc($fields[0])) { + when(/\breplication_method\b/i) { + $g_method = $value; + } when(/\bdebug\b/i) { $g_debug = checkBoolean($value); } @@ -468,10 +586,16 @@ sub getConfig { when(/\blog_file\b/i) { $g_logfile = $value; } - when(/\bslony_user\b/i) { + when(/\bslony_user\b/i) { # Depreciated + $g_user = $value; + } + when(/\bslony_pass\b/i) { # Depreciated + $g_pass = $value; + } + when(/\breplication_user\b/i) { $g_user = $value; } - when(/\bslony_pass\b/i) { + when(/\breplication_pass\b/i) { $g_pass = $value; } when(/\bslony_cluster_name\b/i) { diff --git a/pgbouncer_follower_ro.conf b/pgbouncer_follower_ro.conf index 7c07e7f..e9d2544 100755 --- a/pgbouncer_follower_ro.conf +++ b/pgbouncer_follower_ro.conf @@ -1,16 +1,21 @@ #------------------------------------------------------------------------------ -# Slony cluster information +# Replication cluster information #------------------------------------------------------------------------------ -slony_user=slony # Username to use when connecting to PostgreSQL server to - # retrieve slony cluster configuration +replication_method=slony # Possible values 'slony' or 'wal' -slony_pass= # Password for above, leave blank to use .pgpass +replication_user=repuser # Username to use when connecting to PostgreSQL server to + # retrieve slony cluster configuration / streaming rep state + +replication_pass= # Password for above, leave blank to use .pgpass slony_cluster_name=test_replication # Slony-I replication cluster name -server_conninfo=dbname=TEST host=localhost port=5432 # Conninfo of server to to retrieve slony cluster configuration -server_conninfo=dbname=TEST host=localhost port=5433 # from, accepts multiple servers and will try in order given. -server_conninfo=dbname=TEST host=localhost port=5434 +#------------------------------------------------------------------------------ +# Server information +#------------------------------------------------------------------------------ +server_conninfo=dbname=TEST host=localhost port=5432 # Conninfo of servers. For slony this list is used to pull cluster +server_conninfo=dbname=TEST host=localhost port=5433 # configuration from the first contactable node so all nodes not necessarily +server_conninfo=dbname=TEST host=localhost port=5434 # not necessarily required. For WAL replication all servers required. server_conninfo=dbname=TEST host=localhost port=5435 #------------------------------------------------------------------------------ @@ -22,8 +27,9 @@ follower_poll_interval=5000 slony_sets_to_follow=all # Comma separated list of set id's to follow E.g. "1,2,3,4" or "all" only_follow_origins=false # If true pgbouncer will only be reconfigured and reloaded - # when the origin of a set moves. If false any changes to origins, - # providers or subscribers will initiate a reconfigure and reload. + # when the origin of a set / primary moves. If false any + # changes to origins, providers or subscribers will initiate + # a reconfigure and reload. pool_mode=ro # Values are rw/ro. "rw" follows the origin node # whereas "ro" will follow a subscriber of the sets @@ -31,20 +37,20 @@ pool_mode=ro pool_all_databases=false # If true uses a wildcard in the conninfo for the pooler # thus hosting all databases on the node. If false - # only the replicated database is hosted. + # only the database in the target servers conninfo is hosted. -auth_user= # If set auth_user will be appended to conninfo written +auth_user= # If set auth_user will be appended to conninfo written # in [databases] section. -status_file=/var/slony/pgbouncer_follower/pgbouncer_follower_%mode.status # File used to store tate of the cluster -log_file=/var/slony/pgbouncer_follower/pgbouncer_follower_%mode.log # Log for pool_follower script +status_file=/var/run/pgbouncer_follower_%mode.status # File used to store tate of the cluster +log_file=/var/log/pgbouncer_follower_%mode.log # Log for pool_follower script pid_file=/var/run/pgbouncer_follower_%mode.pid # Pidfile for poll mode pool_conf_template=/etc/pgbouncer/pgbouncer_%mode.template # Template configuration file pool_conf_target=/etc/pgbouncer/pgbouncer_%mode.ini # Target configuration file to be modified -pool_reload_command=/etc/init.d/pgbouncer_%mode reload # Command used to action configuration changes +pool_reload_command=/etc/init.d/pgbouncer_%mode restart # Command used to action configuration changes # Sepcial values for status_file, log_file, pool_conf_template # pool_conf_target and pool_reload_command parameters: # %mode - Pool Mode # %clname - Slony cluster name -max_ro_lag=1200 # Maximum lag in seconds allowed for subscriber nodes when +max_ro_lag=1200 # Maximum lag in seconds allowed for subscriber nodes when # running in ro mode. 0 = don't monitor lag. diff --git a/pgbouncer_follower_rw.conf b/pgbouncer_follower_rw.conf index 8f58c75..79688bb 100755 --- a/pgbouncer_follower_rw.conf +++ b/pgbouncer_follower_rw.conf @@ -1,16 +1,21 @@ #------------------------------------------------------------------------------ -# Slony cluster information +# Replication cluster information #------------------------------------------------------------------------------ -slony_user=slony # Username to use when connecting to PostgreSQL server to - # retrieve slony cluster configuration +replication_method=slony # Possible values 'slony' or 'wal' -slony_pass= # Password for above, leave blank to use .pgpass +replication_user=repuser # Username to use when connecting to PostgreSQL server to + # retrieve slony cluster configuration / streaming rep state + +replication_pass= # Password for above, leave blank to use .pgpass slony_cluster_name=test_replication # Slony-I replication cluster name -server_conninfo=dbname=TEST host=localhost port=5432 # Conninfo of server to to retrieve slony cluster configuration -server_conninfo=dbname=TEST host=localhost port=5433 # from, accepts multiple servers and will try in order given. -server_conninfo=dbname=TEST host=localhost port=5434 +#------------------------------------------------------------------------------ +# Server information +#------------------------------------------------------------------------------ +server_conninfo=dbname=TEST host=localhost port=5432 # Conninfo of servers. For slony this list is used to pull cluster +server_conninfo=dbname=TEST host=localhost port=5433 # configuration from the first contactable node so all nodes not necessarily +server_conninfo=dbname=TEST host=localhost port=5434 # not necessarily required. For WAL replication all servers required. server_conninfo=dbname=TEST host=localhost port=5435 #------------------------------------------------------------------------------ @@ -22,8 +27,9 @@ follower_poll_interval=5000 slony_sets_to_follow=all # Comma separated list of set id's to follow E.g. "1,2,3,4" or "all" only_follow_origins=true # If true pgbouncer will only be reconfigured and reloaded - # when the origin of a set moves. If false any changes to origins, - # providers or subscribers will initiate a reconfigure and reload. + # when the origin of a set / primary moves. If false any + # changes to origins, providers or subscribers will initiate + # a reconfigure and reload. pool_mode=rw # Values are rw/ro. "rw" follows the origin node # whereas "ro" will follow a subscriber of the sets @@ -31,13 +37,13 @@ pool_mode=rw pool_all_databases=false # If true uses a wildcard in the conninfo for the pooler # thus hosting all databases on the node. If false - # only the replicated database is hosted. + # only the database in the target servers conninfo is hosted. auth_user= # If set auth_user will be appended to conninfo written # in [databases] section. -status_file=/var/slony/pgbouncer_follower/pgbouncer_follower_%mode.status # File used to store tate of the cluster -log_file=/var/slony/pgbouncer_follower/pgbouncer_follower_%mode.log # Log for pool_follower script +status_file=/var/run/pgbouncer_follower_%mode.status # File used to store tate of the cluster +log_file=/var/log/pgbouncer_follower_%mode.log # Log for pool_follower script pid_file=/var/run/pgbouncer_follower_%mode.pid # Pidfile for poll mode pool_conf_template=/etc/pgbouncer/pgbouncer_%mode.template # Template configuration file pool_conf_target=/etc/pgbouncer/pgbouncer_%mode.ini # Target configuration file to be modified @@ -46,5 +52,5 @@ pool_reload_command=/etc/init.d/pgbouncer_%mode restart # pool_conf_target and pool_reload_command parameters: # %mode - Pool Mode # %clname - Slony cluster name -max_ro_lag=0 # Maximum lag in seconds allowed for subscriber nodes when +max_ro_lag=0 # Maximum lag in seconds allowed for subscriber nodes when # running in ro mode. 0 = don't monitor lag. diff --git a/pgbouncer_follower_wal_ro.conf b/pgbouncer_follower_wal_ro.conf new file mode 100755 index 0000000..72f3c6d --- /dev/null +++ b/pgbouncer_follower_wal_ro.conf @@ -0,0 +1,55 @@ +#------------------------------------------------------------------------------ +# Replication cluster information +#------------------------------------------------------------------------------ +replication_method=wal # Possible values 'slony' or 'wal' + +replication_user=repuser # Username to use when connecting to PostgreSQL server to + # retrieve slony cluster configuration / streaming rep state + +replication_pass= # Password for above, leave blank to use .pgpass + +slony_cluster_name=test_replication # Slony-I replication cluster name + +#------------------------------------------------------------------------------ +# Server information +#------------------------------------------------------------------------------ +server_conninfo=dbname=test host=localhost port=5432 # Conninfo of servers. For slony this list is used to pull cluster +server_conninfo=dbname=test host=localhost port=5433 # configuration from the first contactable node so all nodes not necessarily +server_conninfo=dbname=test host=localhost port=5434 # not necessarily required. For WAL replication all servers required. + +#------------------------------------------------------------------------------ +# PgBouncer follower information +#------------------------------------------------------------------------------ +debug=false +follower_poll_interval=5000 # Cluster state poll interval (milliseconds) + +slony_sets_to_follow=all # Comma separated list of set id's to follow E.g. "1,2,3,4" or "all" + +only_follow_origins=false # If true pgbouncer will only be reconfigured and reloaded + # when the origin of a set / primary moves. If false any + # changes to origins, providers or subscribers will initiate + # a reconfigure and reload. + +pool_mode=ro # Values are rw/ro. "rw" follows the origin node + # whereas "ro" will follow a subscriber of the sets + # specified in slony_sets_to_follow + +pool_all_databases=true # If true uses a wildcard in the conninfo for the pooler + # thus hosting all databases on the node. If false + # only the database in the target servers conninfo is hosted. + +auth_user= # If set auth_user will be appended to conninfo written + # in [databases] section. + +status_file=/var/run/pgbouncer_follower.status # File used to store tate of the cluster +log_file=/var/log/pgbouncer_follower.log # Log for pool_follower script +pid_file=/var/run/pgbouncer_follower.pid # Pidfile for poll mode +pool_conf_template=/etc/pgbouncer/pgbouncer.template # Template configuration file +pool_conf_target=/etc/pgbouncer/pgbouncer.ini # Target configuration file to be modified +pool_reload_command=/etc/init.d/pgbouncer restart # Command used to action configuration changes + # Sepcial values for status_file, log_file, pool_conf_template + # pool_conf_target and pool_reload_command parameters: + # %mode - Pool Mode + # %clname - Slony cluster name +max_ro_lag=1200 # Maximum lag in seconds allowed for subscriber nodes when + # running in ro mode. 0 = don't monitor lag. diff --git a/pgbouncer_follower_wal_rw.conf b/pgbouncer_follower_wal_rw.conf new file mode 100755 index 0000000..9b37420 --- /dev/null +++ b/pgbouncer_follower_wal_rw.conf @@ -0,0 +1,55 @@ +#------------------------------------------------------------------------------ +# Replication cluster information +#------------------------------------------------------------------------------ +replication_method=wal # Possible values 'slony' or 'wal' + +replication_user=repuser # Username to use when connecting to PostgreSQL server to + # retrieve slony cluster configuration / streaming rep state + +replication_pass= # Password for above, leave blank to use .pgpass + +slony_cluster_name=test_replication # Slony-I replication cluster name + +#------------------------------------------------------------------------------ +# Server information +#------------------------------------------------------------------------------ +server_conninfo=dbname=test host=localhost port=5432 # Conninfo of servers. For slony this list is used to pull cluster +server_conninfo=dbname=test host=localhost port=5433 # configuration from the first contactable node so all nodes not necessarily +server_conninfo=dbname=test host=localhost port=5434 # not necessarily required. For WAL replication all servers required. + +#------------------------------------------------------------------------------ +# PgBouncer follower information +#------------------------------------------------------------------------------ +debug=false +follower_poll_interval=5000 # Cluster state poll interval (milliseconds) + +slony_sets_to_follow=all # Comma separated list of set id's to follow E.g. "1,2,3,4" or "all" + +only_follow_origins=true # If true pgbouncer will only be reconfigured and reloaded + # when the origin of a set / primary moves. If false any + # changes to origins, providers or subscribers will initiate + # a reconfigure and reload. + +pool_mode=rw # Values are rw/ro. "rw" follows the origin node + # whereas "ro" will follow a subscriber of the sets + # specified in slony_sets_to_follow + +pool_all_databases=true # If true uses a wildcard in the conninfo for the pooler + # thus hosting all databases on the node. If false + # only the database in the target servers conninfo is hosted. + +auth_user= # If set auth_user will be appended to conninfo written + # in [databases] section. + +status_file=/var/run/pgbouncer_follower.status # File used to store tate of the cluster +log_file=/var/log/pgbouncer_follower.log # Log for pool_follower script +pid_file=/var/run/pgbouncer_follower.pid # Pidfile for poll mode +pool_conf_template=/etc/pgbouncer/pgbouncer.template # Template configuration file +pool_conf_target=/etc/pgbouncer/pgbouncer.ini # Target configuration file to be modified +pool_reload_command=/etc/init.d/pgbouncer restart # Command used to action configuration changes + # Sepcial values for status_file, log_file, pool_conf_template + # pool_conf_target and pool_reload_command parameters: + # %mode - Pool Mode + # %clname - Slony cluster name +max_ro_lag=0 # Maximum lag in seconds allowed for subscriber nodes when + # running in ro mode. 0 = don't monitor lag.